Product | Description | Typical
uses | Coverage/Yield |
Thioflex
600GG/PG 2.5 Litres 2.5
Litres | Two
part polysulphide sealant | Provides
excellent adhesion to common building substrates. It is particularly recommended
for sealing structural expansion joints in most civil engineering structures like
building superstructure, subways , basements, floors and reservoirs. | Refer
to Datasheet |
Nitoseal
280 1.5 & 4 litres | Heavy
duty epoxy urethane joint sealant | For
sealing internal floor joints subject to heavy industrial use in factories , warehouses
etc. Particularly suitable for sawcut joints in long strip flooring and other
non-moving joints. | Internal
width(mm) x sealant depth(mm) x joint length(m)/1000 |
Decofill
0.5 & 1 kg | Acrylic
crack filling sealant | For
sealing internal & external cracks. |
Refer to Datasheet |
Nitoseal
MS50 600ml sachets
| One part general
purpose building sealant | Suitable
for sealing joints in Concrete, Brick work, Blockwork, Perimeter Sealing around
doors and windows, Non-trafficked floor joints. Can be applied damp substrates
, environmentally friendly. | Refer
to Datasheet |
Nitoseal
MS 600 600ml sachets | One
part civil engineering sealant | Suitable
for sealing movement joints in building and civil engineering structures including
joints that will be subjected in intermittent or permanent immersion. It is UV
resistant. Approved for use in contact with potable water. | Refer
to Datasheet |
Nitoproof
100/120 N100-5, 20, 50 & 200 litres N120- 3.75, 15 & 73 litres | Bituminous
waterproofing coating | External coating
for below ground structures such as cellars waterproofing. Protection of concrete
against ground water ingress - water tanks, reservoirs, waterproof sandwich membranes,
basements, and roof structures. | Nitoproof
100-4-6 mē/litre Nitoproof120 - 1.0 - 2.5 mē/litre/coat |
Brushbond Part
A - 6, 23 kgs Part B - 1, 4 litres | Two
component acrylic modified cementitious coating for concrete and masonry surface | Provides
seamless, flexible, waterproof coating suitable for use in water tanks, sunken
slab, sumps, roofs, basements to ensure water tightness. | Industrial
pack : 16-18 mē @ 1 mm thickness |
Brushbond
RFX Part A - 15kg, 5kg Part B - 4.8 litres, 1.63 litres | Elastomeric
polymer modified cementitious waterproof coating | Used
for waterproofing of existing and new structure. Also suitable for all types of
structures including those situated in coastal environment - Roof, basements,
water tanks etc. | 12-14
mēn two coats to achieve 1mm thickness |
Brushbond
TGP
15kg bags | Crystalline
capillary waterproofing system for cementitious substrates |
For waterproofing against the positive or negative sides of hydrostatic heads
of water, for dampproofing , repairing cracks, plugging holes, sealing wall -
floor joints and stopping active leaks. | 1.0
to 2.0 kg/mēper application (brush) |
Brushbond
TI Flexicoat
4 and 20 litres pack | Elastomeric
acrylic polymer based solar reflective and insulating coating | For
use as a thermal insulation coating on roof slabs and walls of buildings. It can
also be used on the interior walls and the roof of freezer rooms and cold storage
facilities. | 2.5 -
3.0 mē/coat/ litre after dilution on steel or Concrete surfaces. |
Burshbond
Coolcoat
4 & 20 litres | Polymer
based solar reflection and thermal insulating coating | Low
thermal conductivity which reduces energy consumption's durable excellent resistance
to UV and good adhesion to building substrate. | 7
mē/coat/litre |
Hydroproof
1,
5 , 20 & 50litres | Single
component polymer for cement based waterproofing | Provides
an effective and economical method of waterproofing to concrete and masonry surfaces,
by mixing with cement and application by brush. | Refer
to Datasheet |
