Product | Description | Typical
uses | Dosage |
| Water
reducing admixtures(Plasticisers) |
Conplast
P211 1,5,20 & 200 Ltrs | Water
reducing admixture. Conforms to IS : 9103-99 Also complies with IS : 2645-2003
& ASTM C494 Type A. | All structural
and general concrete where improved density and quality are required. Cement saving
where excess cement proves necessary to obtain target strength. | 150-250
ml/bag of cement |
| Conplast
SD 110 5,20 & 200 Ltrs | Cement
save for concrete block | Used to reduce
material cost by reduction in cement without loss of strength or by increasing
strength without additional cement . To get high early strength to improve upon
productivity. | 0.4 Ltrs
per 100 kg cement is normally used. |
| High
range water reducing admixtures (Superplasticisers) |
| Conplast
SP337 5, 20 & 200 Ltrs | High
performance water reducing super plasticisers. Conforms to IS : 9103-1999. Also
complies with IS : 2645-2003, BS 5075 part 3 and ASTM C-494 Type F | Production
of precast elements-beams, shell forms and railway sleepers. Easy compaction in
heavily reinforced concrete bridges, foundations . columns, beams and narrow formwork
units | 300-570ml/ bag
of cement |
| Conplast
SP430 5, 20 & 200 Ltrs | High
range superplasticising admixture. Complies with IS : 9103:1999 and BS 5075 part
3. It also conforms to ASTM C-494 Type F and Type G depending on the dosages used. | Speeds
up construction, increases work ability and cohesion. Aids pumping by reducing
line friction and dry packing. Low porosity resulting in substantially improved
water penetration resistance. | 250
ml -1 litre/ bag of cement |
| Accelerators,
Surface Retarders & Corrosion Inhibitors |
Conplast
NC 5, 20 & 200 Ltrs | Chloride
free accelerating admixture. Complies with IS : 9103-99, BS 5075 Part 1 and ASTM
C494 Type C | Precast concrete sections,
concrete placed in cold weather conditions and concrete for repairs etc. | 1
- 1.5 litres/bag of cement. |
| Integral
Waterproofing Compound |
Conplast
X4211C / WL 125ml, 500ml, 1, 5, 20 & 50 liters | Integral
waterproofing liquid admixture for concrete and mortar. Conforms to IS : 2645-2003
& IS : 9103-1999 | Increases the
waterproofing properties of concrete and cement sand mortars. | 125-200ml/
bag of cement |
| Conplast
WP90 / WP 100 Powder 1 & 25 Kg | Integral
waterproofing powder additive for concrete and mortar. Conforms to IS : 2645 -
2003 | To reduce permeability of concrete
and sand/cement mortar for use in basements, roof slabs, screeds and water retaining
structures. | 1 kg/ bag
of cement |
Cebex 112 100 ml, 1, 5 & 20 litres | Mortar
Plasticiser and Plastering aid | To
improve workability and trowelling properties of sand/cement mortar mixes during
application and to minimize shrinkage cracks. | 100
ml/bag of cement |
